GOF API指令

A

• add_mapped_instance

B

• buffer

C

• change_gate
• change_net
• change_pin
• change_port
• check_design
• compare
• compare_nets
• convert_gated_clocks
• create_clock
• create_pin_mapping_json_file
• create_reset
• current_design
• current_instance

D

• del_gate
• del_net
• del_port
• dft_drc

E

• elab_rtl
• elaborate
• exist_inst
• exist_wire

F

• find_equal_nets
• fix_design
• fix_logic
• fix_modules
• flatten_modules

G

• get_cell_cofactors
• get_cell_info
• get_cells
• get_conns
• get_coord
• get_definition
• get_driver
• get_drivers
• get_instance
• get_instances
• get_leaf_pin_dir
• get_leafs_count
• get_lib_cells
• get_loads
• get_loads_phase
• get_logic_cone
• get_modules
• get_net_of
• get_nets
• get_path
• get_pins
• get_ports
• get_ref
• get_resolved
• get_roots
• get_scan_flop
• get_spare_cells
• get_spare_in_use
• gexit
• gof_version
• gprint

I

• is_leaf
• is_pin_masked
• is_scan_flop
• is_seq

L

• list_wireload

M

• map_spare_cells

N

• new_gate
• new_net
• new_port

P

• place_gate
• place_port
• pop_top
• post_recovery
• preserve_modules
• push_top

R

• read_def
• read_design
• read_file
• read_lef
• read_library
• read_rtl
• read_rtlpatch
• read_sdf
• read_svf
• read_vcd
• rename_net
• report_eco
• report_spares
• report_timing
• restore_session
• rtl_compare
• run
• run_lec

S

• save_session
• sch
• set_auto_fix_floating
• set_bfix
• set_blackbox
• set_bound_opti
• set_buffer
• set_buffer_distance
• set_clock_uncertainty
• set_cluster_command
• set_cluster_timeout
• set_constraints
• set_cutpoint_thresh
• set_cutpoint_ultra
• set_define
• set_detect_points
• set_disable_cross_hierarchy_merge
• set_disable_lib_cache
• set_dont_fix_modules
• set_dont_use
• set_eco_effort
• set_eco_point_json
• set_equal
• set_error_out
• set_exit_on_error
• set_exit_on_warning
• set_false_path
• set_floating_as_zero
• set_flop_default_eco
• set_flop_merge_enable
• set_high_effort
• set_ignore_instance
• set_ignore_network
• set_ignore_output
• set_ignore_pin
• set_inc_dirs
• set_initial_trans
• set_input_delay
• set_input_transition
• set_inside_mod
• set_inst
• set_inv
• set_invert
• set_keep_format
• set_keep_tree
• set_keypoints_rep_in_ref
• set_leaf
• set_log_file
• set_low_effort
• set_mapped_point
• set_mapping_method
• set_max_lines
• set_max_loop
• set_mod2mod
• set_mu
• set_multibit_blasting
• set_multibit_output
• set_net_constant
• set_noexact_pin_match
• set_observe_points
• set_one_fault
• set_only_use
• set_output_delay
• set_output_load
• set_phase_adjust_en
• set_phase_inv
• set_physical_aware
• set_pin_constant
• set_power
• set_preserve
• set_quiet
• set_recovery_distance
• set_remove_undsc_in_ref
• set_rtl_eco_full_hier_fan
• set_save_mapped_instance
• set_scan_pairs
• set_sn_vs_rn
• set_solver_timeout
• set_tiehi_net
• set_tielo_net
• set_time_frame_limit
• set_top
• set_tree
• set_user_match
• set_verbose
• set_wireload
• set_xm_flop_merge_enable
• setup_eco
• source
• start_gui
• stitch_scan_chain
• suppress_errors
• suppress_warnings
• swap_inst

U

• undo_eco

V

• verify_faults
• verify_state

W

• write_compare_points
• write_dcsh
• write_formality_help_files
• write_perl
• write_soce
• write_spare_file
• write_tcl
• write_verilog