GOF 命令行帮助

Usage: gof [options] netlists
netlists
Netlist files to be loaded. There can be multiple netlist files listed, 
if the design has more than one netlist files.
options:
-h
Print out this info.
-lib 
Specifies liberty file (technology library).
There can be multiple -lib options,
if the design has more than one technology library files.
-v 
Specifies simulation library file name which has verilog definition 
for leaf gates, like AND2X4.
There can be multiple -v options, if the design has more than one simulation library.
-lib should be used unless the leaf cells defined in simulation library are true black box
-vmacro 
For ECO purpose. Each module in the file appears as leaf cell, and it can be
added like other leaf cell in ECO. When write out ECO netlist, the file content appears
in the beginning of ECO netlist. And the ECO cell is added as a hierarchical sub-block.
-run 
Specifies ECO script name. The script is compatible with Perl syntax.
gof stays in shell mode when the script finishes.
-shell
Runs in text mode with shell prompt, GofCall APIs can be run in interactive mode in shell.
-o 
Specifies log file name, default gatesof.log.
-Top_1 
Specifies another netlist files to build Top_1 tree. The hierarchy will shown up in left 
side of GofViewer window. -Top_2 -Top_3 ... can be used to load more netlist files.
Note, when this option takes all netlist files followed, so the main netlist files 
should appear before this option. For example, 
'gof -lib tsmc.lib imp_netlist1 imp_netlist2 -Top_1 ref_netlist1 ref_netlist2' 
will create two trees in the left side of GofViewer window.
While, 'gof -lib tsmc.lib -Top_1 imp_netlist1 imp_netlist2 ref_netlist1 ref_netlist2' 
will build only one tree, since Top_1 option takes up all of the netlist files,
the main tree is gone.
-ref 
Specifies reference netlist files. 
+define+PARAMETER0+PARAMETER1
Defines PARAMETER0 PARAMETER1.
-id 
Specifies design name. The name appears on GUI Window tile bar.
-def 
Specifies DEF file (Design Exchange Format).
There can be multiple -def options, 
if the design has more than one def files.
-defverbose
Reports all def error, otherwise only first 10 are reported.
-lef 
Specifies Library Exchange Format file.
There can be multiple -lef options, 
if the design has more than one lef files.
-sparelist 
Specifies spare cells list file.
-parallel 
Define parallel processing CPU Core number.
Set the number to zero to disable parallel processing.
By default, the tool picks a optimal number according to the host CPU setting.
-f 
Loads all the files and options in the file_list_file
-vcd 
Specifies VCD file for schematic annotation
-textbutton
Text mode button instead of image mode button in ECO operations
-version
Prints out current version and exits.
-licquery
Queries license usage.
-------------------------------------------Examples-----------------------------------------
gof -lib tsmc.lib soc.v
Loads one netlist file 'soc.v' and one technology library, 'tsmc.lib'
gof -lib tsmc_std.lib -lib tsmc_io.lib top.v part0.v part1.v
Loads three netlists, top.v, part0.v and part1.v, two liberty files
tsmc_std.lib, IO cells, tsmc_io.lib
gof -lib tsmc_std.lib -lib tsmc_io.lib -v analog_models.v top.v part0.v part1.v
Loads analog cells in verilog library file analog_models.v all analog cells are black boxes. 
gof -lib tsmc_std.lib -lib tsmc_io.lib -vn macros.v -v analog_models.v top.v part0.v part1.v
Loads macros.v as macro cell
gof -lib tsmc.lib -def soc.def.gz -lef libcell.lef soc.v
Loads Design Exchange Format file soc.def.gz. And library exchange format file for layout view usage.
gof -lib tsmc.lib soc.v -run scripts.pl
Processes netlist with scripts.pl. Scripts.pl is in Perl syntax and support  APIs
gof -lib tsmc.lib top.v netlist.vg -vcd top.vcd
Loads VCD file for schematic annotation.
gof -lib tsmc.lib imp_netlist.v -ref ref_netlist.v
Loads both implementation netlist and reference netlist, can be used in netlist comparison.